Everyone has seen the stars and planets in the night sky at some point in their life. Many times, the bodies appear so close that they can touch. A combination of clouds, pollution, tree canopy coverage, and urban lights has made the bodies invisible the following night. This article describes how to paint a galaxy.
A galaxy painting would be an excellent way to preserve the night sky and have it available whenever you like. You can benefit significantly from the comfort of a personal canopy of stars. You can turn a galactic mural into a realistic-looking work of art by using essential tools and glow paint.
Along the way, we’ll explain how to paint a galaxy to help you improve your skills and guide you through the steps to create a galaxy.
How to Paint a Galaxy
At the bottom of the canvas, measure, and mark halfway. Take a measuring tape and mark each side of the canvas 7″ from the top. Secure the canvas with masking tape.
Add the first layer of galaxy sky colors with a flat brush. Black, blue, purple, pink, and light pink start at the outer edge and reach the inner edge. Slap the colors on canvas; it does not have to be perfect.
Using your sponge, mix the colors from lightest to darkest (light pink and pink, pink and purple, purple and blue, blue and black).
Then let it dry.
The second coat of paint will be applied after the first layer is blended with a sponge. Add all the colors to the black, blue, purple, light pink, and repeat steps 2 & 3. Mix well.
In the middle of your milky way, add some pure white with your brush. Using your sponge, blend very lightly. The galaxy milky way galaxy painting combined with white highlights will look more light pink.
Light pink can be added directly onto your sponge to add nebula clouds to the sky. When all the stars are on top, they will look very dimensional and pretty.
Add some more pure white to the center of your milky way if you want it to look even more vibrant. Lightly blend with a sponge.
It would help thin white paint with a tablespoon of water and a dollop of white paint. Start flicking the brush across the galaxy night sky after you’ve dipped it in the thinned paint.
With a 1/4″ angled brush, paint the silhouetted trees with black paint after dried stars. It will be easier to paint with black paint if you thin it down a bit.
Make a stencil of the moon. Set it up where you want it. Paint 1/2 of it with thinned white paint. Blend with a sponge.
Make your trees look like the moonlight is reflecting off the tops of the trees by using your angled brush or flat brush.
Prepare the color paper first. Make sure the paper doesn’t buckle if it becomes wet by taping the edge. To prevent the paper from shifting, you can also tape it to the tabletop. Press the masking tape against some fabric before sticking it to the paper. Even low-tack tape should be treated this way. When it’s too sticky, peeling it off too quickly can cause it to tear.
On top of a small layer of water, paint blobs of purple and blue watercolor paint. A flat brush is used to wet the paper, and a round brush is used to apply colors. To achieve a natural-looking look, use loose, untidy brushstrokes. Mix different shades of blue to create a vibrant watercolor galaxy. Pink or purple will help your watercolor galaxy come to life.
In wet-on-wet painting, colors flow into each other to give the impression of being blended. If your paper is drying and your brushstrokes have a clear edge, dampen your brush and run it along the lines. Use a lighter color across the middle to create a watercolor galaxy.
Even if you don’t have any white gouache paint, you can still make stars by leaving some tiny spots unpainted. Then, you can continue painting.
Colors are not perfect at this stage – we will build them up later with more layers. Make sure you change your painting water regularly if you want the lighter areas of the painting to appear blue!
To give the impression of a night sky in your watercolor galaxy painting, add several darker layers. Paint over the first layer without first soaking it in water. Allow it to completely dry. Make the corners darker than the center and layer colors on top of each other. Instead of dark blue, use black watercolor paint to create a moody look.
The paint will bleed into the wet area of the painting when color is added to one corner of the painting.
Dab some paper towels over-saturated areas if you’ve added too much water to your painting if you want a textured look.
Now we need to add the stars! You can draw the dots with a white rollerball pen or paint pen. Painting can be done with either a fine paintbrush or white gouache paint on a brush. You can keep changing the size of the stars until you are satisfied.
You might want to paint concentrated areas between darker and lighter parts of your painting. This will create the illusion of the Milky Way. Look at pictures of the Milky Way to decide where to cluster your stars.
Getting this part right can take a lot of time, so do not rush. Keep your stars looking round by wetting your brush often – by doing so; you can build them up gradually. You may see rough edges around the stars if you use a dry brush.
It will help if you let your watercolor galaxy completely dry. Please take off the masking tape from your finished artwork after it has dried. Paint that has leaked through the edges can be repaired with a layer of white gouache.
In the beginning, tape a sheet of watercolor paper to a strong surface. If you do not have a masonite board, you can tape your desk down.
Make lighter and darker areas of the page by applying different colors. Look up pictures of actual galaxies for ideas if you’re not sure what colors to choose. We’ll add multiple layers to build up the color so that it bleeds slightly into one another. Watercolor paint should do that pretty well on its own. Let the paint dry completely before moving on, and add splotches of color until the entire page is covered.
The depth of the galaxy gradually increases through these steps. You should darken certain areas and make certain areas more colorful. You can leave some areas almost white if you like. Afterward, allow the paint to dry completely before you move to the next layer.
Create depth in your galaxy by building up dark colors until you are satisfied with the result.
The stars need to be added to your galaxy now. Using your toothbrush or another stiff brush, flick some white acrylic ink over the painting. Flick until you get the number of stars you want. Alternatively, you can dab in more stars with a small brush and white acrylic ink if you wish.
A watercolor galaxy painting is complete.
To begin, dab Persian blue towards the center of the canvas.
You should not slide the colors in but instead dab them towards the center.
Blend the Persian blue with the light blue first. Mix them.
Now you can mix the pink with the light blue.
Expand white outwards, starting with white. Pink doesn’t need to be added.
Finally, this time using a toothbrush to paint stars on.
Complete the perfect painting galaxy now.
Want to learn how to paint a galaxy filled a night sky. Still, you’re afraid they’re too complicated for beginners, or you have no idea where to start.
They make excellent backgrounds for atmospheric portraits, or they can be used on their own as a standalone piece. Your finished painting could also be cut up to create a collage with stars.
Step-by-step instructions show above how to paint a galaxy no painting skills necessary!